With no fuel, the vehicle will not run.
By the way, for anyone interested in a cheap way to access data on your particular vehicle, I contacted a company called "alldatadiy who have online manuals for just about every automobile.
Anything which causes the apparent resistance in the circuit to change by a significant amount will trigger the security system, and cause the car not to start.If you want additional assistance, feel free to chat with, email or call a Pontiac representative.Start the car, and while it is running, cut the yellow wire.After spending several days reading through most of them, I decided I would try to follow some of the advise presented, and bypass the security system.I don't believe GM has sent out any troubleshooting/maintenance bulletins on vehicles after 2005.I may be wrong on that.You can avoid paying a dealer to change the lock cylinder by performing a simple modification on your vehicle.Re-connect the two outside connectors to the Body Control Module.
If it is, it allows the car to start.
In Figure 2 I have isolated the two wires and tied a green string around them Figure 3 showing the wires we will make connection.
Post #209 For those of you who have not done it yet: Mine is a 1997 GrandAm.So I've been looking for the owner's manual for my Suzuki Swift 2006 for a while, and finally found one!Baldwin, b35-S, bIG A 92036, bosch prison break saison 4 ar 3430, bosch 72210, bosch premium OIL filters 3430, bravo.Then cut the yellow wire about 4" from the connector.If you know that this procedure works on your car, then you can proceed with the modification.