Following are the steps required: Step 1, open a web browser and enter the IP address of your Cisco access point Step 2 Enter the necessary credentials (username password) Step 3 Once successfully logged in, youll be presented with Summary Status page: Step 4 From.
Cisco with a capital, c (case-sensitive).
Factory Reset via mode Button, this is the most common reset method engineers look for, and weve got it covered in four easy-to-follow steps!
Mode Button 2) Via, web Interface.Mode button pressed for 20 seconds (the time it takes until the status LED turns amber it initiates the recovery process: Factory Reset via Web Interface (Recommended Option for Remote Reset).This completes the Factory Reset procedure for all Cisco Aironet 1100 1200 series access points.Step 4, reboot the access point by performing a power-cycle (switch off and then on) After the access point reboots, you must reconfigure the access point by using the Web-browser interface or the CLI.
Resetting your Cisco access point via its web interface is an easy process.
It is clear that once the access point sees the.
The first method (Mode Button) does not keyboard driver packard bell easynote tk85 require any user credentials or passwords as the reset procedure is performed during the boot up process and does not involve logging into the access point.Step 2, press and hold the, mODE button while you reconnect power to the access point.Here we can select the Reset to Defaults to initiate the factory reset or alternatively the Reset to Defaults (Except IP) if we wish to reset to factory defaults but keep the current IP address. .The access point will present a number of different management options.In addition, the factory default IP address for the access point will.