Wait for around 15 minutes for the software upgrade to complete itself.
When the update has completed the decoder will restart itself automatically.
You will see a warning that you are about to delete all existing and planned recordings.After approximately two minutes the Housekeeping message will disappear and your Sky box will carry out the procedure and switch itself off and back.Explore the latest offers and upgrades tailored to you.Remove your Sky viewing macromedia robohelp x5 crack card from the decoder.Plug the scart cable (20 pin cable) into.BE warned: This will clear your HD and thus wipe all your recorded programs!Have you moved house/shifted your SKY box?
Take the mains power out of the box, press and hold both left and right arrors on the top of the box and whilst holding plug back into mains, the record light should show at which point you release the left and right and press.
If you have an HD-ready TV, plug the hdmi vijeo citect scada software cable into the hdmi socket on the back of your MY SKY box and the other end into the hdmi 1 socket (or another available hdmi socket) on the back of your.
Press 0 (zero then 1, then select.
Connect the screw-in satellite cable into.If you don't have an HD-ready TV, use your old scart cable (20 pin cable) to connect your MY SKY box to your.Still holding down the back-up button, count to 15, or wait until all the lights on the front of the decoder are.You may end-up doing permanent damage.This page has been archived for future reference.